ROLL-ON-CONNECTOR

The CE Roll On Connector forms a sealed joint between the inside of the coiled tubing and the CT tool string, or another line of coiled tubing. The joint O.D. of the tool is the same as the coiled tubing.

 The tubing end must first be prepared by removing the inner bead using a CE Bead Removal Tool* and polished to deliver a proper seal condition. The Roll-On Connector can then be inserted, and the tubing roll formed over internal radii on the connector body using a DTI Roll-On Form Tool*. Although it is not the strongest or full bore, this is a useful, cost-effective, disposable connector that is quick and simple to attach. It is often used for wash tool string operations.